ASTM A325-07 Heat treated steel structural bolts with a minimum tensile strength of 830Mpa

ASTM A938-07 Wire Torsion

ASTM A1007-07 Carbon steel wire for wire rope

ASTM A999/A999M-04A General Requirements for Alloy and Stainless Steel Pipe

ASTM A998/A998M-98(2003) Structure of steel reinforcement for factory-made corrugated steel pipe fittings for sewers and other facilities

ASTM A997-07 Surface of Investment Castings

ASTM A996/A996M-06A Rail and Axle Steel Profiled Bars for Concrete Reinforcement

ASTM A995/A995M-98(2003) Austenitic-ferritic (duplex) stainless steel castings for pressure-bearing parts

ASTM A994-05 Steel, Stainless Steel, and Related Alloy Products

ASTM A992/A992M-06A Structural Steel Shapes

ASTM A991/A991M-98(2004) Measurement of Furnace Temperature Uniformity for Heat Treated Steel Products

ASTM A99-03 Ferromanganese

ASTM A990-06 Iron-Nickel-Chromium and Nickel Alloy Castings for Pressure Holding Parts Control in Corrosive Environments

ASTM A989/A989M-05 HIP Alloy Steel Flanges, Fittings, and Valves for High Temperature Equipment

ASTM A987-05 Measurement of Shape Properties of Tin Rolled Products

ASTM A986/A986M-01(2006) Magnetic particle inspection of continuous grain flow crankshaft forgings

ASTM A985/A985M-04A General Requirements for Steel Circumferential Castings for Pressure-Retaining Components

ASTM A984/A984M-03 Hot-dip galvanized plain-end black steel pipe for resistance-welded trunk lines

ASTM A983/A983M-06 Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

ASTM A982/A982M-05 Stainless Steel Forgings for Compressor and Turbine Wings

ASTM A981-97(2007) Standard Test Method for Evaluating Bond Strength of 15.2 mm (0.6 in) Diameter Prestressed Continuous Cast Billets Used in Prestressed Ground Anchors No. 270

ASTM A981-97(2002) (replaced by ASTM A981-97(2007)) Evaluation of Bond Strength of Grade 270 Unplated 15.2 mm (0.6 in.) Diameter Steel Strands in Prestressed Ground Anchors

ASTM A980-97(2003) Ultra-high-strength cold-rolled carbon steel sheet

ASTM A979/A979M-03 Concrete Pavements and Liners Installed in Field Corrugated Steel Structures

ASTM A978/A978M-97(2002)e1 Pre-coated and polyethylene-lined composite ribbed steel pipes for self-flowing domestic sewage pipes, stormwater pipes and other special facilities

ASTM A977/A977M-02 Determination of Magnetic Properties of High Coercivity Permanent Magnetic Materials Using a Hysteresis Curve

ASTM A976-03 Method for classifying insulating coatings by composition, relative insulating capacity, and use

ASTM A975-97(2003) Double Twisted Hexagonal Mesh Baskets and Slope Reinforcement Mesh (Metal-Coated Steel Wire or Metal-Coated Steel Wire with Polyvinyl Chloride (PVC) Coating)

ASTM A974-97(2003) Welded Wire Fence Gabions and Gabion Reinforcement Mesh (Metal-Coated or PVC-Coated)

ASTM A973/A973M-01 Grade 100 Alloy Steel Chains

ASTM A972/A972M-00(2004) Fused Epoxy Coated Steel Pipe Piles

ASTM A971/A971M-05 Measurement of edge taper and crowning of flat-rolled electrical steel coils

ASTM A970/A970M-06 Hot-dip galvanized production line cap support bars for concrete reinforcement

ASTM A968/A968M-96(2001) Chromium, chromium-nickel and silicon alloy steel bars and shapes for corrosion and heat resistance

ASTM A967-05e1 Chemical Passivation of Stainless Steel Components

ASTM A967-05 (replaced by ASTM A967-05e1) Chemical Passivation of Stainless Steel Parts

ASTM A966/A966M-96(2006) (replaced by ASTM A966/A966M-07) Magnetic particle inspection of steel forgings using alternating current

ASTM A966/A966M-07 Magnetic particle inspection of steel forgings using alternating current

ASTM A965/A965M-06A Austenitic Steel Forgings for Pressure and High Temperature Components

ASTM A964/A964M-03 Corrugated Steel Box Culverts

ASTM A962/A962M-07a General Requirements for Steel Fasteners or Fastener Materials or Both Used in Any Temperature Range from Cryogenic to Creep

ASTM A962/A962M-07 (replaced by ASTM A962/A962M-07a) General Requirements for Steel Fasteners or Fastener Materials or Both for Any Temperature Range from Cryogenic to Creep

ASTM A961/A961M-07 General Requirements for Steel Flanges, Forged Fittings, Valves, and Components for Piping Equipment

ASTM A960/A960M-07 General Requirements for Forged Steel Pipe Fittings

ASTM A959-04 specifies wrought stainless steel systems

ASTM A958-00(2006) Tensile Castings of Carbon and Alloy Steel Similar to Forging Grades

ASTM A957/A957M-06 General Requirements for Steel and Alloy Investment Castings for General Industrial Use

ASTM A956-06 Testing the Leeb Hardness of Steel Products

ASTM A955/A955M-07a Special-shaped stainless steel bars and ordinary stainless steel bars for concrete reinforcement

ASTM A955/A955M-07 (replaced by ASTM A955/A955M-07a) Special-shaped stainless steel bars and ordinary stainless steel bars for concrete reinforcement

ASTM A952/A952M-02 Forged Grade 80 and Grade 100 Steel Lifting Assemblies and Welded Tie Rods

ASTM A951/A951M-06 Wire for Masonry Caulking Reinforcement

ASTM A950/A950M-99(2007) Welded Epoxy-Coated Structural Steel I-piles and Sheet Piles

ASTM A950/A950M-99(2003) (replaced by ASTM A950/A950M-99(2007)) Welded Epoxy-Coated Structural Steel I-piles and Sheet Piles

ASTM A949/A949M-01(2005) Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

ASTM A947M-95(2004) Textured Stainless Steel Sheet (Metric)

ASTM A946-95(2004) Chromium, chromium-nickel and silicon alloy steel sheets for corrosion and heat resistance

ASTM A945/A945M-06e1 Low Carbon Sulfur Restricted High Strength Low Alloy Structural Steel Sheet with Improved Weldability, Formability, and Toughness

ASTM A944-05 Comparison of Reinforcement and Concrete Bond Strength Using Beam End Specimens

ASTM A943/A943M-01(2005) Spray-Formed Seamless Austenitic Stainless Steel Pipe

ASTM A942-95(2007) Centrifugal Casting White Iron/Grey Iron Bimetal Wear-Resistant Roller Housing

ASTM A941-06A for Steels, Stainless Steels, Related Alloys, and Iron-Based Alloys

ASTM A940/A940M-06 Locally Heat Treated Vacuum Treated Alloy Steel Forgings for Turbine Wheels

ASTM A939-96(2006) (replaced by ASTM A939-07) Boring Surface of Cylindrical Forgings

ASTM A939-07 Ultrasonic Inspection of Boring Surfaces of Cylindrical Forgings

ASTM A938-04 (replaced by ASTM A938-04) Wire Torsion Test

ASTM A937/A937M-06 Determination of Interlayer Resistance of Insulating Coatings Using Critical Test Surfaces

ASTM A934/A934M-04 Epoxy-coated prefabricated steel bars

ASTM A933/A933M-07 PVC-Coated Steel Wire and Welded Wire Mesh for Reinforcement

ASTM A932/A932M-01(2006) Standard Test Galvanized Iron Wire for AC Magnetic Properties of Amorphous Materials at Mains Frequency Using Wattmeter-Ammeter-Voltmeter and Sheet Steel Samples

ASTM A931-96(2002) Tensile Testing of Steel Ropes and Strands

ASTM A929/A929M-01 (replaced by ASTM A929/A929M-01(2007)) Hot-dip metal-coated steel sheets for corrugated steel pipes

ASTM A929/A929M-01(2007) Hot-dip metal-coated steel sheet for corrugated steel pipe

ASTM A928/A928M-05 Ferritic/Austenitic (Duplex) Electrofusion Welded with Filler Metals

ASTM A927/A927M-04 AC Magnetic Properties of Toroidal Cores Using the Voltmeter-Ammeter-Wattmeter Method

ASTM A926-03 Abrasion Resistance of Coating Materials for Corrugated Metal Pipe

ASTM A925-03 Zinc-5% Aluminum-Cerium Alloy Coated Steel Overhead Metal Strands

ASTM A924/A924M-07 Hot-dip metal-coated steel sheet for general purpose

ASTM A923-06 Determination of Unstable Intermetallic Phases in Wrought Duplex Austenitic/Ferritic Stainless Steels

ASTM A922-05 Silicon Metal

ASTM A921/A921M-93(2005) Microalloyed Special Hot Forged Steel for Post Hot Forging

ASTM A920/A920M-02A Microalloyed Hot Forged Special Steel with Mechanical Properties

ASTM A918-06 Electrolytic galvanized-nickel alloy steel sheets for applications requiring marking of the quality of each surface coating

ASTM A917-06A Electrolytically Coated Steel Sheets for Equipment requiring a Symbol to indicate the Quality Symbol of Each Surface Coating

ASTM A915/A915M-93(2003) Chemical requirements similar to standard wrought grade carbon alloy steel castings

ASTM A914/A914M-92(2005) Steel bars subject to limited end quench hardening requirements

ASTM A913/A913M-04 Construction-Grade High-Strength Low-Alloy Steel Sections Produced by Quenching and Self-Tempering (QST)

ASTM A912/A912M-04 Test of AC Magnetic Properties of Amorphous Materials at Electric Frequency by Multimeter Ring Sample Method

ASTM A911/A911M-05 Uncoated Stress-Relieved Steel Rods for Prestressed Concrete Sleepers

ASTM A910/A910M-05 Uncoated, Unwelded 2- and 3-Strand Steel Strands for Prestressed Concrete

ASTM A909/A909M-06 Microalloy Forgings for General Industrial Use

ASTM A908-03 Stainless Steel Needle Tube

ASTM A906/A906M-02 Alloy Steel Chain Slings, Grade 80 and 100, for Suspended Hoisting Equipment

ASTM A905-04 Pressure Vessel Coil Wire

ASTM A904-04 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys

ASTM A903/A903M-99(2003) Surface of Steel Castings by Magnetic Particle and Liquid Penetrant Examination

ASTM A902-06A on Metal-Coated Steel Products

ASTM A901-03 Semi-finished amorphous core alloys

ASTM A900/A900M-01(2006) Test method for stacking factor of amorphous magnetic tape

ASTM A90/A90M-07 Test Method for Weight (Mass) of Zinc or Zinc Alloy Coatings on Steel Articles

ASTM A899-91(2002) Epoxy Coated Steel

ASTM A898/A898M-07 Direct Beam Ultrasonic Inspection of Rolled Steel Structural Sections

ASTM A897/A897M-06 Austempered Ductile Iron

ASTM A896-89(2004) Electroplated Structure Case Study Implementation

ASTM A895-89(2004) Free-cutting stainless steel plate, sheet and strip

ASTM A894/A894M-00(2005) Saturation magnetization or magnetic induction properties of non-gold magnetic materials

ASTM A893/A893M-03 Composite permittivity of non-metallic magnetic materials at microwave frequencies

ASTM A892-06 Microstructure of High Carbon Bearing Steel

ASTM A891-98(2003) (replaced by ASTM A891/A891M-07) Precipitation-hardening iron-based superalloy forgings for turbine rotor discs and wheels

ASTM A891/A891M-07 Microstructure of High Carbon Bearing Steel

ASTM A890/A890M-99(2003) General purpose iron--chromium--nickel--molybdenum corrosion-resistant duplex (austenitic/ferritic) steel castings

ASTM A889/A889M-03 Determination of AC Magnetic Properties of Materials in De facto Galvanized Wire under Low Inductive Conditions Using a Multimeter Method and a 25 cm Epstein Frame

ASTM A888-07a Linerless Cast Iron Pipe and Fittings for Sewer, Storm, Sewer, and Exhaust

ASTM A887-89(2004) Boric acid-treated stainless steel plate, sheet, and strip for nuclear equipment

ASTM A886/A886M-05 Stress-relieved seven-wire toothed wire rope for prestressed concrete

ASTM A884/A884M-06 Epoxy Coated Wire and Welded Wire Reinforcement

ASTM A882/A882M-04A Seven-wire prestressed steel wire rope with epoxy coating

ASTM A881/A881M-05 Stress-Relieved or Low-Stress-Relieved Profiled Wires for Prestressed Concrete Railroad Sleepers

ASTM A879/A879M-06 Electrolytically Galvanized Sheet Steel for Equipment Required to Specify the Quality of Each Surface Coating

ASTM A878/A878M-05 High Quality Modified Chrome Vanadium Wire for Valve Springs

ASTM A877/A877M-05 High-quality chrome-silicon alloy steel wire for valve springs

ASTM A876-03 Fully processed flat-rolled grain-oriented ferrosilicon electrical steel

ASTM A875/A875M-06 Hot Dip Treated Zinc-5% Aluminum Alloy Coated Steel Sheet

ASTM A874/A874M-98(2004) Ferritic ductile iron castings suitable for low temperature service

ASTM A872/A872M-07A Centrifugal Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

ASTM A871/A871M-03 (replaced by ASTM A871/A871M-03 (2007) for hot dip galvanizing of the Institute) High Strength Low Alloy Structural Steel Plates for Air Corrosion Resistance

ASTM A871/A871M-03(2007) High Strength Low Alloy Structural Steel Plates for Air Corrosion Resistance

ASTM A866-01 Medium Carbon Steel for Wear Resistant Bearings

ASTM A865/A865M-06 Black Steel or Zinc Coated (Galvanized) Welded or Seamless Pipe Couplings for Pipe Joining

ASTM A862/A862M-98(2003) Corrugated Steel Sewage and Drain Pipes

ASTM A861-04 High-Silicon Iron Pipe and Fittings

ASTM A859/A859M-04 Age-hardening Nickel Copper Chromium Molybdenum Niobium Low Carbon Alloy Steel Forgings for Pressure Vessel Components

ASTM A858/A858M-07 Heat-treated carbon steel parts for low temperature and corrosion

ASTM A857/A857M-07 Cold-Formed Lightweight Sheet Piles

ASTM A856/A856M-03 Zinc-5% Aluminum-Cerium Alloy Coated Carbon Wire

ASTM A855/A855M-03 Zinc-5% Aluminum-Cerium Alloy Coated Wire Rope

ASTM A854/A854M-98(2003) Metal-Coated Glossy High-Strength Steel Fences and Lattice Wires

ASTM A853-04 General Purpose Carbon Steel Wire

ASTM A852/A852M-03 (replaced by ASTM A852/A852M-03 (2007)) Quenched and Tempered Low Alloy Structural Steel Plate [4 inches (100 mm) thickness, minimum yield strength galvanized steel wire psi (485 MPa)] (AASHTO M313/M313M)

ASTM A852/A852M-03(2007) Quenched and Tempered Low-Alloy Structural Steel Plates [4 inches (100 mm) thickness, minimum yield strength psi (485 MPa)] (AASHTO M313/M313M )

ASTM A849-00(2005) Corrugated Steel Drainage and Sewer Pipe Backcoats, Surfaces, and Linings

ASTM A848-01(2006) Low Carbon Magnets

ASTM A847/A847M-05 Cold-Formed Welded and Seamless High-Strength Low-Alloy Structural Pipe with Improved Environmental Corrosion Resistance

ASTM A844/A844M-04 Alloy Steel Plates Containing 9% Nickel for Direct Quenching Processed Pressure Vessels

ASTM A842-85(2004) Dense Graphite Iron Castings

ASTM A841/A841M-03A Thermomechanically Controlled Process (TMCP) Medium and Heavy Steel Plates for Pressure Vessels

ASTM A840-06 Fully Treated Magnetic Sandwich Steel

ASTM A839-02 Ferrophosphorus Powder Metallurgy Manufacturing for Soft Magnetic Applications

ASTM A838-02(2007) Free-cutting ferritic stainless soft magnetic alloy technology for relays

ASTM A837/A837M-06 Alloy Steel Forgings for Carburizing Equipment

ASTM A836/A836M-02(2007) Titanium Stabilized Carbon Steel for Glass-Lined Pipes and Pressure Vessels

ASTM A835/A835M-84(2005) Dimensions of Ferrous Alloys and Alloy Additives

ASTM A834-95(2006) Iron and iron castings for general industrial use

ASTM A833-84(2001) Recommendations for the determination of hard nicks in metallic materials with a comparative hardness tester

ASTM A832/A832M-06 Chromium-barium and chromium-molybdenum-vanadium-titanium-boron alloy steels for pressure vessels

ASTM A830/A830M-06 High Quality Carbon Steel Plates for Structural Chemical Composition Requirements

ASTM A829/A829M-06 Alloy Structural Steel Plates

ASTM A827/A827M-02(2007) Carbon Steel Plates for Forgings and Similar Products

ASTM A824-01 (Superseded by ASTM A824-01(2007)) Marcelled Tension Metal-Coated Wire for Chain Link Fences

ASTM A824-01(2007) Marcelled Tension Metal-Coated Wire for Chain Link Fences

ASTM A822/A822M-04 Seamless Cold-Drawn Carbon Steel Pipe for Hydraulic Systems

ASTM A821/A821M-05 Cold Drawn Wire for Prestressed Concrete Reservoirs

ASTM A820/A820M-06 Steel Fibers for Steel Fiber Concrete

ASTM A82/A82M-05A Concrete Rebar

ASTM A818-06 Copper Plated Carbon Steel Wire